Hydraulic Water Pressure Reducing Valves DN65 DIN / BS / AWWA / JIS

Pressure Reducing Valve, Size:- DN65 / Pressure rating - PN16, Body Material – DI – GGG

Technical requirements:-

• Body material – DI – GGG40
•  
• Face to face standard – EN 558-1
•  
• Flange standard conformity – EN 1092 – 2.
•  
• Testing standard – EN 12266 – 1.
•  
• Pressure Reducing Valves 10 Bar & 8 Bar Pressure Gauges shall be supplied
•  
• Below details should be embossed in all the valves.
•  
  • logo
  •  
  • Corresponding valve size (DN)
  •  
  • Corresponding pressure class (PN)
  •  
  • Flow direction
  •  
  • Heat No

Size from  DN32 to DN700

Hydraulic valve for controling pressure and flow rate

(with an excess flow pilot and a pressure regulator pilot)

Main characteristics:

• Standard: EN ISO 9635-5:2014 and EN 14267:2004

• Body & bonnet: ductile iron, coated Epoxy 250 μm

• Diaphragm: rubber+reinforced nylon

• Spring: stainless steel

• Screws: stainless steel

• Connecting: flanged ends

• Pressure loss < 0.10 bar (completely open)

• Pressure loss < 0.40 bar (with orifice)

• Pilots: Bronze

• Excess flow pilot: type three-ways differential pressure, spring adjustable on the spot,

material: bronze, in combination with a calibrated orifice disk

(made of stainless steel or plastic) for the differential pressure measurement,

comprising the connecting to the hydraulic valve by PEHD pipes

(DN6-8-12mm according to the DN of the valve)

• Pressure regulator pilot: three-ways,

material: bronze, spring adjustable on the spot,

comprising the connecting to the hydraulic valve by PEHD pipes

(DN6-8-12mm according to the DN of the valve)

Medium: Water

Main Technical Feature
Nominal Pressure					1.0MPA	1.6MPA	2.5MPA
Test pressure of the shell					1.5MPA	2.4MPA	3.75MPA
Sealed test pressure					1.1MPA	1.76MPA	2.75MPA
Suitable temperature					≤80℃
Suitable medium					water

The valves limits the flow rate in the pipeline to a preset rate, regardless of upstream pressure variations.

The valves is controlled by pilot valves, which takes use of integrated orifice plate to detect flow rate

represented by differential pressure, and the differential pressure is used to control the pilot valves to

implement flow rate control.